Very high standard syringe pumps of your Orchestra composition, the Module DPS fits your safety and ease of use requirements. A wide range of syringe capacities ensures the Module DPS adaptation to all paediatric and adult protocols.

Very high standard volumetric pump of your Orchestra composition, the Module MVP fits with your safety and ease of use requirements. The Module MVP MS benefits of OCS (Occlusivity Check System), a unique autotest which verifies the pump functioning in association with the set and prevents any free flow risk.

A large range of setting modes (primary/secondary, bolus, micro, sequential, ramp-up/ramp-down) enables the use of any protocols : from the simplest to the most specific. The infusion continuity is protected by means of an occlusion pre alarm and a disconnection warning.

Orchestra volumetric pumps and syringe pumps have a similar functioning mode and user interface for a quick learning process.

Dynamic daily Workstation set up, Orchestra gathers from 1 to 8 infusion devices, syringe pumps (Module DPS) and/or infusion pumps (Module MVP) on a Data Controller, Base A, the Base Intensive (IDMS) or on the Base Primea, powering all devices with a single power cable.

The Base A is a Data Concentrator and supplies mains power for up to 8 Module DPS or Module MVP. It enables the connection of Orchestra Infusion Workstation to a Patient Data Management System via a unique RS 232 cable

Towards Global Infusion Data Management Systems (IDMS)

Dynamic daily Workstation set up, Orchestra gathers from 1 to 8 infusion devices, syringe pumps (Module DPS) and/or infusion pumps (Module MVP) on a Data Controller, Base A, or on the Base Intensive (IDMS) powering all devices with a single power cable.

Orchestra,with the Intensive Base, provides the first interactive and centralised Infusion Data Management System (IDMS) without any software and hardware systems added.

Base Primea, integrated to the Orchestra system, allows for the first time the simultaneous control in TCI of analgesics and hypnotics. The Base Primea is the only infusion workstation integrating the most recent knowledge in TCI and adapted to every clinical practices.

VIGILANT® is a Software associated to Orchestra® Base Intensive and Base Primea®, Composed of 3 modules:

• VIGILANT® Bar code

Syringes identification with a bar code sticker that contains the drug name, its dilution and the patient’s name

• VIGILANT® Druglib base intensive V3/Base Primea

Each drug is associated to a default dilution, a prescription unit and a range of authorised settings

• VIGILANT® supervision

Alarms and IV drug administration parameters; central display for all your patients

The new generation of stand alone syringe pumps.

• Compact & simple to operate, Table top, IV pole or bar mount, Carry handle.
• Clear display of all infusion parameters, alarms and warnings.
• Adjustable alarm volume and display brightness.
• Solid syringe plunger protection arm to avoid damage and accidental bolus.
• Flow rate range: 0.1 up to 1,200 ml/hr (syringe size-dependant).
• Accepts 5-50/60ml syringes; wide syringe brand library.
• Infusion Modes: ml/h, Volume / time, Volume limit.
• Manual bolus: Rate 50-1200 ml/h.
• Drug library of 50 agents, Adjustment of the dilution, authorised& default infusion modes, flow rate and bolus limits.
• 2 Pressure modes: variable or 3 pre-set levels.
• Dynamic Pressure System - DPS - warns of pressure variations.
• Anti-bolus system: Reduces significantly bolus after occlusion release.
• Stackable and linked power supply available.

Fresenius Vial Pilot A2 is a syringe pump that allows precise intravenous infusion at low flow rate. A large syringe choice, universal symbols for the user interface, clear information of different alarms and securities make the Pilot A2 very user friendly. Adjustable pressure limits, full syringe positioning detection and protection provide an optimal level of security.

A drug library including infusion protocols in mass units secures and eases IV infusion in the operating theatres. Each drug protocol presets induction and maintenance flow rate for a fast and safe set up. Thanks to its occlusion pre-alarm and tubing set disconnection alarm, the Pilot Anaesthesia 2 is the ideal instrument for infusion of short acting agents.

The Master PCA aims to provide a low cost solution for Patient Controlled Analgesia therapy in hospital environment. Very user friendly, thanks to pre-set protocols., five PCA modes are available (Bolus, Bolus + Continuous, Bolus + time limited Continuous, Bolus + decreasing Continuous, Bolus + triggered Continuous) to improve the quality of care. Different keys secure syringe and programming accesses for maximal safety.

Intuitive Generation of Stand Alone Infusion Pumps:

• Flow rate range: 1-1200 ml/h in normal mode, 0.1- 99.9 ml/h in micro mode.
• Flow rate can be limited according to drug name.
• 5 setting modes: ml/h only, Volume / Time, Volume + Flow rate, Flow rate + Time, combination of Volume + Time + Rate.
• OCS Occlusivity Check System is the only auto-test to check the good working order of the pump in association with its set and thus preventing risk of free-flow.
• Bolus: adjustable from 50 ml/h to 1200ml/h.
• Customized drug library with Vigilant®, the IV Medication Safety Solution.
• 2 pressure modes: variable or 3 pre-set levels.
• Dynamic Pressure System - DPS - warns of pressure variations.
• Battery: Li-Ion, battery life at least 8 hours at 100 ml/h.